Skip to content

System Status

On the System Status page, you can check the system status of the PON router, including PON Status, PON WAN, VoIP, LAN, Mesh, Devices, Wireless 2.4G, Wireless 5G, DHCP Server, and System.

  • PON Status: Shows the PON Link Status, Mode and ONU State. Click More Details to view more detailed information or configure the GPON Auth.

  • PON WAN: Shows the PON WAN status and the quantity of devices online or offline. Click More Details to view more detailed information or configure the PON WAN.

  • VoIP: Shows the VoIP Status being up or down, whether it is enabled or not, and the amount of telephone number. Click More Details to view more detailed information or configure some basic or advanced settings about the VoIP.

  • LAN: Shows the connected LAN port status. Click More Details to know more information about it or make changes.

  • Mesh: Shows the Mesh network status (SOLE or MESH), the mesh device name and the amount of mesh units. Click More Details to know more information or add/manage mesh unit(s).

  • Devices: Shows the number of devices connected to this Router, via Ethernet cable or 2.4G WiFi or 5G WiFi. Click More Details to know more information about these devices, or configure the settings.

    • Internet: Click to enable/disable the Internet for the devices.
    • VPN: Click to enable/disable VPN for the devices.
    • Operation: Click to pop up the editing page as below, where you can customize the device name and limit the download/upload rate.
  • Wireless 2.4G: Shows the Wireless 2.4G status. Click More Details to know more information about it or make changes.

  • Wireless 5G: Shows the Wireless 5G status. Click More Details to know more information about it or make changes.

  • DHCP Server: Shows the DHCP Server status. Click More Details to know more information about it or make changes.

  • System: Shows the System status. Click More Details to view more information about it.

    • Status: Shows the Router info about firmware version, model, hardware version, local time and uptime.
    • Statistics: Shows the detailed traffic information of each interface in the statistics list.
    • ARP: lists the connected devices' IP address with its bound MAC address, Hostname and Interfaces.
    • Active IP Routes: table contains a list of routes to network destinations associated with and known by the Router.
    • System Log: tracks all the Router behaviors. It is used for technical support to diagnose and troubleshoot for the Router.