WISP

WISP supports the router to wirelessly connect to a distant Wi-Fi network and share that connection locally via Ethernet/Wi-Fi, acting as a client bridge.

You may check the Host Network status on the System Status -> WISP -> More details -> Status.

You may configure the WISP function through System Status -> WISP -> More details -> Settings or General Settings -> WISP page.

Please follow the steps to configure it.

1. Turn on Enabled to activate the WISP function.

2. Select to connect to 5GHz or 2.4GHz WiFi network. Then click Scan to search for available Wi-Fi networks. If necessary, click Rescan to re-search or update the host network list.

   • BSSID: Displays the MAC address of the host network.
   • SSID: Displays the visible name of the host Wi-Fi network.
   • Channel: Displays the frequency band the host network uses.
   • Signal: Displays the host network's signal strength.

3. Select your target host network and click Connect to pop up the connection page.

4. Enter the password if required and click Save & Apply.

Success!