Quick Installation Guide

Follow the instructions below to get your router ready for use fast and easy.

1. Install the cellular antennas if there are detachable ones.

2. With the gold contacts facing down,insert your SlM card(s) into the SlM slot(s) until you hear a clicking sound.

   Note

   No hot-swapping. Please insert or remove the SlM card while the system is powered off.

3. Plug the power adapter to the router and press ON/OFF button. Wait for the system LED to turn solid on. This may take 2-5 minutes.

4. Check the Internet LED.

   • If the Internet LED is in blue or purple, the router is already connected to the cellular network.
   • If the Internet LED is in red or off, please continue with the following steps to configure the router.

5. Connect to the router through Wi-Fi or with an Ethernet cable.

   • Through WiFi: Connect your device to the router's Wi-Fi using the SSlD (network name) and Password printed on the product label.
   • With an Ethernet cable: Turn off the Wi-Fi on your device and connect it to the router's LAN port with an Ethernet cable.

6. Launch a browser, enter cudy.net (or 192.168.10.1) in the address bar, and create an administrator password to log in.

7. Follow the step-by-step instructions to finish the Quick Setup.

   • Select your Time Zone. (Optional)Enable Auto Update. Click Next.
   • Select your SIM Slot and APN Profile, and Auto is recommended. For other options, check with your SIM card provider. Click Next.
   • Customize your 2.4G/5G Wireless SSID and password or just keep it as default. Click Next.
   • Confirm your settings or click Back to make adjustments. Click Save & Apply.

Note

• If the signal is still too weak indoors, try installing your extension antennas (not included in the box) to the SMA connector and placing the antennas outdoors.
• If a SIM blocked window pops up, please input your SIM PIN or contact your carrier for help.