Skip to content

General Settings - Wireless

Wireless is to customize the Router’s wireless settings, including SSID and password, mode, channel, channel width and transmit power, and so on.

You may go to General Settings -> Wireless or System Status -> Wireless 2.4G/5G -> More Details -> Settings to configure this feature.

  • Smart Connect: When it is enabled, 2.4GHz and 5GHz networks will share the same network name and password (only one SSlD will be displayed). Your wireless devices will automatically switch to connect to the Wi-Fi band providing the fastest speed. No manual configuration is needed.

Wireless 5G

To manually configure the 5G wireless settings, please follow the steps below.

  1. Enable Wireless 5G;
  2. Customize your SSID (wireless network name);
  3. Select a strong Encryption and create a secure Password for your wireless network. Click Save & Apply to save these basic settings, or Advanced to continue with more and advanced settings.
  4. Select a proper Mode, Channel, Channel Width and Transmit Power;
  5. (Optional) Enter the maximum number of devices you want to allow on your network in the Max Stations field.
  6. Enable Hidden Network, if you don’t want your SSID to display automatically. Then you need to manually join the network.
  7. (If any) Enable Separate Clients to isolate the wireless clients from each other.
  8. Click Save & Apply to apply your new settings.

Note

P2 is used as an example in this guide. Refer to your actual product for more details.

Wireless 2.4G

To manually configure the 2.4G wireless settings, please follow the steps below.

  1. Enable Wireless 2.4G;
  2. Customize your SSID (wireless network name);
  3. Select a strong Encryption and create a secure Password for your wireless network. Click Save & Apply to save these basic settings, or Advanced to continue with more and advanced settings.
  4. Select a proper Mode, Channel, Channel Width and Transmit Power;
  5. (Optional) Enter the maximum number of devices you want to allow on your network in the Max Stations field.
  6. Enable Hidden Network, if you don’t want your SSID to display automatically. Then you need to manually join the network.
  7. (If any) Enable Separate Clients to isolate the wireless clients from each other.
  8. Click Save & Apply to apply your new settings.