Skip to content

Status

Device

System

  • Device Name: Identifier for the Router.

  • Uptime: Time duration since last reboot.

  • Firmware Version: Currently installed Router OS version.

  • CPU Usage: Current processor load percentage.

  • Memory Usage: RAM utilization percentage

  • Name Servers: Name of the DNS servers.

  • IPv4/IPv6 Default Gateway: Primary route to external networks.

LAN Configuration

  • IP Address: Router's local network IP.

  • Subnet Mask: Network segment definition.

  • DHCP Server: Status of automatic IP assignment.

  • MAC Address: Physical hardware ID of LAN port.

WAN Configuration

  • Interface: Physical port.

  • VLAN ID: Virtual network tag (if applicable).

  • Connection Type: Physical medium (e.g., Fiber/DSL).

  • Protocol: Internet protocol (e.g., PPPoE, DHCP, Static).

  • IP Address: Public/WAN-facing IP.

  • Gateway: ISP-provided gateway IP.

  • Status: Connection state (Connected/Disconnected).

IPv6

LAN Configuration

  • IPv6 Address: Global unicast address assigned to the router's LAN interface (e.g., 2001:db8::1/64). Requires ISP IPv6 deployment and local network support.

  • IPv6 Link-Local Address: Automatically generated address (fe80::/10) for local network communication, even without global IPv6 connectivity.

Prefix Delegation

  • Prefix: IPv6 network segment (e.g., 2001:db8:1::/48) delegated by ISP to the router for subnet allocation. Critical for enterprise networks with multiple VLANs.

WAN Configuration

  • Interface: Physical WAN port (e.g., eth0, ppp0) or logical tunnel interface.

  • VLAN ID: ISP-specific tag (e.g.,100 for internet, 200 for VoIP) to separate services.

  • Connection Type: Physical medium: Fiber, DSL, Cable, or 5G Backhaul.

  • Protocol: PPPoE (requires credentials), DHCP (auto), Static IP (manual config).

  • IP Address: Public/WAN-facing address (IPv4/IPv6) provided by ISP.

  • Gateway: ISP's upstream router IP (next hop for internet traffic).

  • Status: Connected/Disconnected + uptime counter.

Route Configuration

  • Destination IP: Target network (e.g., 192.168.2.0/24 for a branch office).

  • Source: Originating traffic filter (optional, e.g., LAN or VPN).

  • Gateway: Next-hop IP for the route (e.g., 10.0.0.1 for a VPN tunnel).

  • Metric: Priority value (lower = preferred); 10 for primary WAN, 20 for failover.

  • Interface: Egress port (e.g., ppp0 for DSL, tun0 for VPN).

DS-Lite Configuration

  • AFTR name: ISP's Address Family Transition Router hostname (e.g., aftr.isp.com).

  • AFTR address: IPv6 address of the ISP's transition gateway (e.g., 2001:db8:ffff::1).

  • DS-Lite DHCPv6 option: Enables automatic DS-Lite tunnel configuration (IANA option 64).

    Refresh: Click to update the IPv6 Status.

PON

PON Status

  • BOSA Temperature: Operating temperature of the optical transceiver (-40°C to +85°C). Critical Threshold: >75°C may degrade performance.

  • Voltage: Power supply voltage (typically 3.3V ±0.3V). Fault Condition: <2.8V or >3.8V indicates power issues.

  • Tx Power: Optical signal strength sent to OLT (typical: +1.5dBm to +5dBm). Failure Sign: <-8dBm (fiber break/connector issue).

  • Rx Power: Incoming optical signal strength (optimal: -8dBm to -28dBm). Critical Range: >-8dBm (overload) / <-30dBm (signal loss).

  • Bias Current: Laser driver current (20mA–50mA for DFB lasers). Risk: >60mA shortens laser lifespan.

GPON Status

  • ONU State: Operational status: Operation (normal), LOS (signal loss), Dying-Gasp (power failure).

  • ONU ID: Unique identifier (0–255) assigned by OLT. Conflicts may require reset.

  • LOID Status: Authentication state: Authenticated (success) / Auth-Fail (invalid credentials).

    Refresh: Click to update the PON Status.

LAN Port

LAN Port Status

  • LAN1/2/3/4: Displays the Port status including connection or disconnection, data speed, Mode.

    Refresh: Click to update the LAN Port Status.

TR069

TR069 Status

  • Device Name: Identifier for the Router.

  • Inform Status: Sent/Not Sent TR-069 notification by the router to the ACS (Auto Configuration Server), including events like boot-up, periodic updates, or parameter changes.

  • Connection from ACS: Current link state with the ISP's remote management server, Connection or No Connection.